-
WesternFlag – The Starlight D Series (Electric Drying Room)
Short Description The Starlight series drying room is a leading hot-air convection drying room that developed by our company special for hanging stuffs, which is advanced both domestically and internationally. It adopts a design with heat circulation from top to bottom, allowing the recycled hot air to evenly heat all stuffs in all directions. It can quickly increase temperature and facilitate rapid dehydration. The temperature and humidity are automatically controlled, and equipp... -
WesternFlag – The Starlight Z Series (Steam Drying Room)
Short Description The Starlight series drying room is a leading hot-air convection drying room that developed by our company special for hanging stuffs, which is advanced both domestically and internationally. It adopts a design with heat circulation from top to bottom, allowing the recycled hot air to evenly heat all stuffs in all directions. It can quickly increase temperature and facilitate rapid dehydrati... -
WesternFlag – SL3 biomass pellets heater with dust removal device
Short Description A biomass heater is a mechanism that transforms energy utilizing biomass pellets. It is the favored option for the renovation and improvement of steam boilers, thermal oil boilers, hot air stoves, coal burners, electrical heaters, oil-heated stoves, and gas cookers to conserve energy and safeguard the environment. It leads to a 5% – 20% drop in heating expenses compared to coal-fired boilers, and a 50% – 60% reduction compared to oil-fired ones. These heaters find ex... -
WesternFlag – Different power Air Energy Heater
The air heat dryer applies the reverse Carnot cycle principle to draw heat from the air and transfer it to the room, raising the temperature to assist in drying items. It includes a finned evaporator (external unit), a compressor, a finned condenser (internal unit), and an expansion valve. The refrigerant consistently experiences evaporation (absorbing heat from outside)→compression→condensation (emitting heat in the indoor drying room)→throttling→evaporative heat and recycling, thereby moving heat from the external low-temperature environment to the drying room as the refrigerant circulates within the system.
Throughout the drying process, the high-temperature heater constantly warms the drying room in a cycle. Upon reaching the set temperature inside the drying room (e.g., if set at 70°C, the heater will automatically cease operation), and when the temperature drops below the set level, the heater will automatically resume heating. The dehumidification principle is supervised by an in-system timer relay. The timer relay can determine the dehumidification duration for the dehumidifying fan based on the humidity in the drying room (e.g., programming it to run for 1 minute every 21 minutes for dehumidification). By utilizing the timer relay to control the dehumidifying period, it effectively prevents heat loss in the drying room due to the inability to regulate the dehumidifying duration when there is minimal moisture in the drying room.
-
WesternFlag-The Red-Fire D Series (Electric Drying Room)
The Red-Fire series drying room is a leading hot air convection drying room that developed by our company special for the tray-type drying which is widely recognized both domestically and internationally. It adopts a design with left-right/right-left periodic alternating hot air circulation. The hot air is used cyclic after generation, ensuring uniform heating of all stuffs in all directions and enabling quick temperature rise and rapid dehydration. The temperature and humidity can be automatically controlled, greatly reducing production energy consumption. This product has obtained a utility model patent certificate
-
WesternFlag – The Starlight T Series (Natural Gas Drying Room)
The Starlight series drying room is a leading hot-air convection drying room that developed by our company special for hanging stuffs, which is advanced both domestically and internationally. It adopts a design with heat circulation from top to bottom, allowing the recycled hot air to evenly heat all stuffs in all directions. It can quickly increase temperature and facilitate rapid dehydration. The temperature and humidity are automatically controlled, and equipped with a waste heat recovery device, greatly reducing energy consumption during machine running. This series has obtained one national invention patent and three utility model patent certificates.
-
WesternFlag – Multifunctional Mesh Belt Dryer With 5 Layers, 2.2m In Width And 12m In Total Length
The conveyor dryer is a commonly utilized continual drying apparatus, extensively employed in the drying of sheet, ribbon, brick, filtrate block, and granular substances in the processing of farming products, cuisine, medications, and feed industries. It is particularly fit for materials with elevated moisture content, for instance, vegetables and traditional herbal medicine, for which high drying temperatures are prohibited. The mechanism utilizes warm air as the drying medium to incessantl... -
WesternFlag – The Starlight S Series (Biomass pellet Energy Drying Room)
Advantages
1. The internal vessel of the burner is made from resilient, high-temperature resistant stainless steel.
2. The automatic biomass burner comes with automatic ignition, shutdown, and temperature adjustment functions to guarantee complete combustion. The thermal efficiency is above 95%.
3. The temperature rises swiftly and can reach 150℃ with a specialized fan.
4. It is equipped with multiple rows of finned tubes for heat dissipation, with heat conversion efficiency over 80%, offering clean and pollution-free hot air.
-
WesternFlag – The Starlight T Series (Natural Gas Drying Room)
Advantages
1. The inner tank of the heating device is constructed from sturdy, high-temperature resistant stainless steel.
2. The automatic gas burner is equipped with functions for auto ignition, shutdown, and temperature adjustment, ensuring complete combustion. The thermal efficiency is over 95%.
3. The temperature rises rapidly and can reach 200℃ with a specialized fan.
4. It comes with an automatic programmable touchscreen control system, enabling unattended operation with a single button start.
5. It is equipped with a built-in dual waste heat recovery device made of hydrophilic aluminum foil, achieving over 20% energy savings and emissions reduction.
-
WesternFlag – Biomass pellets furnace with water filter set, Environmental friendly
Features
1. Equiped a water filter that absorb dust from combustion, make products more environmentally friendly
2. Independently developed innovative products.
3. Intelligent program for easy operation.
4. Adjustable temperature/firepower setting.
5. Energy-saving, environmentally friendly, and high thermal efficiency.
6. Precise temperature control with a temperature difference of ±1 degree.
7. Durable with a long service life.
8. Convenient maintenance and low usage costs.
9. Optional support frame for free raising and lowering.
10. Long service life with customizable options.
-
WesternFlag – The SL Series Biomass Pellet Heater
Biomass furnace is an equipment for converting energy using biomass pellet fuel. It is the preferred choice for energy conservation and environmental protection transformation and upgrading of steam boilers, thermal oil boilers, hot air stoves, coal furnace, electric stoves, oil stoves, and gas stoves. Its operation reduces heating costs by 5% – 20% compared to coal-fired boilers, and by 50% – 60% compared to oil-fired boilers.It is widely used in food factories, electroplating factories, painting factories, aluminum factories, clothing factories, small-scale power station boilers, ceramic production furnaces, greenhouse heating and drying furnaces, oil well heating, or other factories and enterprises requiring heating. It is applicable for heating, dehumidification, and drying of agricultural products such as grains, seeds, feed, fruits, dehydrated vegetables, mushrooms, Tremella fuciformis, tea, and tobacco, as well as for heating light and heavy industrial products such as pharmaceuticals and chemical raw materials. It can also be used for heating and dehumidification in various facilities, as well as in paint drying, workshops, flower nurseries, poultry farms, offices for heating and more.
-
WesternFlag – The Starlight D Series (Electric Drying Room)
Advantages/Features
1. Low cost,environmentally friendly with no carbon emissions.
2. Group start and stop,low load,precise temperature control,low air fluctuations.
3. Temperature rises rapidly and can reach 200℃ with a special fan.
4. Stainless steel electric heating finned tube,durable.
5. Built in a hydrophilic aluminum foil dual waste heat recovery device,achieving energy savings and emissions reduction both over 20%.
Leading designer, manufacturer and installer in drying and heating industry in China
Research, development, manufacture, installation and after-sales since 2007.
