-
WesternFlag – ZL-1 Model Steam Air Heater With Upper Inlet And Lower Outlet
Advantages/Features
1. Basic construction, appealing appearance, inexpensive.
2. Finned tubes made of steel and aluminum, efficient heat exchange. The underlying tube is comprised of seamless tube 8163, which is resistant to pressure and long-lasting.
3. Electrical steam valve regulates the inflow, automatically shutting off or opening in accordance with the preset temperature to precisely manage the temperature.
4. Substantial air flow and minimal air temperature fluctuations.
5. Insulation box with dense fire-resistant rock wool to prevent heat loss.
6. Fans resistant to high temperatures and high humidity with an IP54 protection rating and insulation rating of H-class.
-
WesternFlag – ZL-2 Model Steam Air Heater With Left-Right Circulation
Advantages/Features
1. Basic configuration and effortless installation.
2. Substantial air capacity and slight air temperature fluctuation.
3. Steel-aluminum finned tubes, exceptional heat exchange efficiency. The base tube is constructed of seamless tube 8163, which is immune to pressure and long-lasting.
4. Electrical steam valve regulates the intake, shutting off or opening automatically based on the established temperature, thereby precisely managing the temperature.
5. Dense fire-resistant rock wool insulation box to prevent heat loss.
6. Ventilator resistant to high temperatures and high humidity with an IP54 protection rating and H-class insulation rating.
7. Left and right ventilators run consecutively in cycles to ensure uniform heating.
8. Automatically supplement fresh air.
-
WesternFlag – ZL-2 Model Steam Air Heater With Left-Right Circulation
Advantages/Features
1. Basic configuration and effortless installation.
2. Substantial air capacity and slight air temperature fluctuation.
3. Steel-aluminum finned tubes, exceptional heat exchange efficiency. The base tube is constructed of seamless tube 8163, which is immune to pressure and long-lasting.
4. Electrical steam valve regulates the intake, shutting off or opening automatically based on the established temperature, thereby precisely managing the temperature.
5. Dense fire-resistant rock wool insulation box to prevent heat loss.
6. Ventilator resistant to high temperatures and high humidity with an IP54 protection rating and H-class insulation rating.
7. Left and right ventilators run consecutively in cycles to ensure uniform heating.
8. Automatically supplement fresh air.
-
WesternFlag – ZL-1 Model Steam Air Heater With Upper Inlet And Lower Outlet
The ZL-1 vapor air warmer comprises six components: fin tube made of steel and aluminum + electrical vapor valve + waste valve + heat insulation box + blower + electrical control system. Vapor travels through the fin tube, releasing heat to the insulation box, blending and warming the fresh or recycled air to the desired temperature, and the blowers convey the hot air to the drying or heating space for the purposes of dehydration, dehumidification, or heating.
-
WesternFlag – TL-5 Model Indirect Burning Furnace With 5 Layers Sleeve
TL-5 burning furnace comprises 5 components: a fan, flue gas inducer, burner, five-layer casing, and control system. The flue gas circulates twice within the furnace, while fresh air circulates thrice. The burner ignites natural gas to produce a high-temperature flame. Guided by the flue gas inducer, heat is transferred to the warmed air through the five-layer casing and dense fins. Simultaneously, the flue gas is expelled from the unit once its temperature drops to 150℃. The heated fresh air enters the casing via the fan. Subsequently, after the heating process, the air’s temperature reaches the designated level and exits through the hot air outlet.
-
WesternFlag – TL-3 Model Direct Burning Furnace With Lower Inlet And Upper Outlet
TL-3 model Direct combustion heater consists of 6 components: natural gas burner + inner reservoir + protective casing + blower +fresh air valve + management setup. It is expressly devised for supporting the airflow in the left and right drying area. For instance, in the 100,000 kcal model drying room, there are 6 blowers, three on the left side and three on the right side. As the three blowers on the left side revolve clockwise, the three on the right side turn counterclockwise successively, establishing a cycle. The left and right sides interchangeably serve as air outlets, expelling all the heat generated by complete combustion of natural gas. It is furnished with an electrical fresh air valve to supplement the fresh air in cooperation with the dehumidification system in the drying area.
-
WesternFlag – TL-4 Model Direct Burning Furnace With 3 Layers Sleeve
The TL-4 burningfurnace is designed with three layers of cylinders and utilizes fully burned natural gas to produce a high-temperature flame. This flame is mixed with fresh air to create the required hot air for various applications. The furnace employs fully automatic single-stage fire, two-stage fire, or modulating burner options to ensure clean output hot air, meeting the drying and dehydration needs for a wide range of materials.
External fresh air flows into the furnace body under negative pressure, passes through two stages to sequentially cool the middle cylinder and inner tank, and then enters the mixing zone where it is fully combined with the high-temperature flame. The mixed air is then extracted from the furnace body and directed into the drying room.
The main burner ceases operation when the temperature reaches the set number, and the auxiliary burner takes over to maintain the temperature. If the temperature drops below the set lower limit, the main burner reignites. This control system ensures efficient temperature regulation for the desired applications.
-
WesternFlag – TL-1 Model Direct Burning Furnace With Upper Inlet And Lower Outlet
TL-1 Combustion equipment comprises 5 elements: natural gas igniter + enclosed container + protective case + ventilator + management mechanism. The igniter produces a hot-flame post thorough combustion in the thermally resistant enclosed container, and this flame mixes with the chilled or recirculated air to produce fresh, high-temperature air. The fan’s force discharges the air to furnish heat to dryers or facilities.
-
WesternFlag – TL-2 Model Direct Burning Furnace With Left-Right Circulation
TL-2 combustion furnace comprises 8 components: natural gas igniter + internal reservoir + insulating container + blower + fresh air valve + waste heat recovery device + dehumidifying blower + regulator system. It is specifically crafted to support downward airflow drying chambers/heating spaces. Upon complete combustion of the natural gas within the internal reservoir, it is mingled with recycled or fresh air, and under the influence of the blower, it is released from the upper outlet into the drying chamber or heating area. Subsequently, the cooled air passes through the lower air outlet for secondary heating and continuous circulation. When the humidity of the circulating air meets the emission standard, the dehumidifying blower and fresh air valve will start simultaneously. The expelled moisture and fresh air undergo adequate heat exchange in the waste heat recovery device, enabling the discharged moisture and the fresh air, now with recovered heat, to enter the circulation system.
-
WesternFlag – Multifunctional Mesh Belt Dryer With 5 Layers, 2.2m In Width And 12m In Total Length
The conveyor dryer is a commonly utilized continual drying apparatus, extensively employed in the drying of sheet, ribbon, brick, filtrate block, and granular substances in the processing of farming products, cuisine, medications, and feed industries. It is particularly fit for materials with elevated moisture content, for instance, vegetables and traditional herbal medicine, for which high drying temperatures are prohibited. The mechanism utilizes warm air as the drying medium to incessantly and reciprocally interact with those moistened substances, allowing the moisture to scatter, vaporize, and evaporate with heat, leading to quick drying, high evaporation strength, and admirable quality of dehydrated items.
It can be classified into single-layer conveyor dryers and multi-layer conveyor dryers. The source can be coal, power, oil, gas, or steam. The belt can be composed of stainless steel, high-temperature resistant non-adhesive material, steel panel, and steel band. Under ordinary conditions, it can also be tailored to the traits of distinct substances, the mechanism with the traits of compact structure, petite floor space, and high thermal efficiency. Particularly proper for drying substances with high moisture, low-temperature drying required, and a need for a good look.
-
WesternFlag – The Starlight S Series (Biomass Pellet Energy Drying Room)
The Starlight array drying chamber is a top-of-the-line hot-air convection drying room that has been developed by our company exclusively for drying hanging items, and has gained advanced recognition both domestically and internationally. It employs a design with heat circulation from bottom to top, enabling the reprocessed hot air to uniformly heat all items in all directions. It can promptly elevate temperature and facilitate swift dehydration. The temperature and moisture levels are automatically regulated, and it is furnished with a waste heat recycling device, considerably reducing energy consumption during machine operation. This series has secured one national invention patent and three utility model patent certificates.
-
WesternFlag – Continuous Discharge Rotary Dryer
The Rotary dryer is among the most established drying machines because of its steady performance, extensive suitability, and substantial drying capacity, and is extensively employed in mining, metallurgy, construction materials, chemical industry, and agricultural industry.
The key part of the cylindrical dryer is a marginally inclined revolving cylinder. As the substances infiltrate the cylinder, they engage with the warm air either in parallel flow, counterflow, or have contact with the heated inner wall, and then undergo desiccation. The dehydrated goods exit from the lower extremity on the opposite side. In the course of the desiccation procedure, the substances travel from the apex to the base due to the gradual rotation of the drum under the force of gravity. Inside the drum, there are raising panels that continuously hoist and sprinkle the substances, thereby boosting the heat exchange area, advancing the drying pace, and propelling the forward movement of the substances. Subsequently, after the heat carrier (warm air or flue gas) desiccates the substances, the entrained debris is apprehended by a whirlwind dirt collector and then discharged.
Leading designer, manufacturer and installer in drying and heating industry in China
Research, development, manufacture, installation and after-sales since 2007.
